Understanding Your iPhone 14 Pro's Water Resistance Rating
The iPhone 14 Pro is engineered with a robust level of protection against liquid ingress, officially carrying an IP68 rating. This designation is crucial for users concerned about accidental spills, rain, or submersion. It signifies that your device has undergone rigorous testing to withstand certain depths and durations of water exposure without suffering internal damage. For daily scenarios, this means common accidents like dropping your phone in a sink or getting caught in a downpour are less likely to cause immediate failure.
- iPhone 14 Pro has an IP68 rating.
- It resists dust and water submersion.
- Rating applies under specific lab conditions.
- Protection is not permanent and degrades over time.
However, it is vital to understand that 'water resistance' does not equate to 'waterproof'. The IP68 rating is not a guarantee against all water-related damage under all circumstances. Apple's specifications provide a clear threshold: submersion up to a maximum depth of 6 meters for up to 30 minutes. Exceeding these limits, or exposing the device to liquids other than fresh water, can still lead to damage. Furthermore, the resistance can diminish over time with normal wear and tear, or after repairs involving component replacement.
What Does IP68 Mean?
The International Protection (IP) rating system is a standard used to classify the degree of protection provided by enclosures against intrusion from solid objects and liquids. The 'IP' stands for 'Ingress Protection'. The rating consists of two digits. The first digit represents protection against solids, and the second against liquids. For the iPhone 14 Pro:
- The '6' in IP68 means it has the highest level of protection against dust and solid particles. It is dust-tight, meaning no dust can enter the enclosure even with prolonged exposure.
- The '8' in IP68 indicates protection against continuous immersion in water under conditions specified by the manufacturer. For the iPhone 14 Pro, this is defined as submersion in fresh water up to 6 meters for up to 30 minutes.
This rating is determined through standardized laboratory testing. Devices are subjected to controlled environments to verify their performance. It’s important to remember that these tests are conducted under ideal conditions, often with fresh, clean water. Real-world scenarios can be far more unpredictable, involving different liquid types, pressures, and temperatures.
Beyond the Rating: Real-World Expectations
While the IP68 rating provides significant peace of mind, it is not an absolute shield. The protection is not permanent and can be compromised. Factors that can affect your iPhone 14 Pro's water resistance include:
- Wear and Tear: The seals and gaskets that provide water resistance can degrade over time due to daily use, drops, and exposure to environmental elements like salt or chlorine.
- Physical Damage: Any cracks in the screen or casing, or damage to the SIM tray, can compromise the internal seals, rendering the device vulnerable.
- Repairs: If your iPhone has undergone any unauthorized or improper repairs, the water resistance seals might not have been restored correctly.
- Liquid Type: The IP rating is typically tested with fresh water. Exposure to salt water, chlorinated pool water, soapy water, or other liquids can be more damaging and may not be covered under warranty.
Therefore, it is always advisable to avoid intentional submersion or prolonged exposure to liquids, even with an IP68-rated device. Treat the rating as an excellent safety net for accidental encounters with water, rather than an invitation to test its limits.
What the iPhone 14 Pro Rating Means for Daily Use
The IP68 rating on your iPhone 14 Pro offers a substantial layer of protection against common everyday accidents involving liquids. This means you can generally use your phone with more confidence in situations where moisture might be present. For instance, if a drink spills near your phone, or if it gets splashed while you're washing dishes, the device is likely to survive unharmed. Similarly, using your iPhone in light rain should not pose a significant risk to its internal components.
This level of resistance is a key feature that differentiates premium smartphones, providing a practical benefit that enhances the user experience. It reduces the anxiety associated with minor liquid encounters, allowing you to focus more on using your device rather than constantly worrying about its safety. It's a testament to the advanced engineering Apple incorporates into its Pro models.
Protection Against Accidental Spills and Splashes
Accidental spills are a primary concern for many smartphone users. Whether it's coffee, juice, or water, a spill can quickly turn into a disaster if the device isn't protected. The iPhone 14 Pro's IP68 rating means that common spills, especially those involving fresh water, are unlikely to cause immediate damage. The seals around the ports, buttons, and screen are designed to prevent these liquids from seeping into the sensitive internal electronics. This offers a significant advantage over older models or devices lacking such protection.
Consider the scenario of using your phone in the kitchen or bathroom. While it's never recommended to submerge your iPhone in the bathtub or use it as a cooking timer directly over a pot of boiling water, the occasional splash from the sink or steam from a shower is less likely to be catastrophic. This built-in resilience is a core part of the device's value proposition, designed to keep up with an active lifestyle.
Rain and Humid Environments
Navigating through rain is a common situation for smartphone users. If you're caught in a downpour while commuting or out for a walk, the iPhone 14 Pro's water resistance provides a crucial buffer. Light to moderate rain is generally manageable, as the seals will prevent water from entering the device. However, it's still wise to protect your phone as much as possible, perhaps by tucking it into a waterproof pocket or bag if the rain becomes heavy or prolonged.
Humid environments also present a challenge. High humidity, such as in a steamy bathroom or during tropical weather, can lead to condensation. While the IP68 rating offers some protection against ambient moisture, extreme humidity levels over extended periods could potentially stress the seals. It's always best practice to keep your device away from direct steam or excessive moisture, even with its robust rating.
What is NOT Covered: Limitations to Consider
It is critical to reiterate that the IP68 rating is not a license to treat your iPhone 14 Pro as a submersible device for recreational purposes. The rating is specific to certain conditions, and exceeding them can void warranties and lead to irreparable damage. Here are key limitations:
- Salt Water and Chlorinated Water: The rating is tested with fresh water. Exposure to salt water (ocean, sea) or chlorinated water (swimming pools) can be far more corrosive and damaging. These liquids can degrade the seals and corrode internal components even if they don't cause immediate failure.
- Pressurized Water: Using your iPhone with high-pressure water, such as a power washer or a strong faucet stream, can force water past the seals, even if the depth and duration are within limits.
- Other Liquids: Coffee, tea, soda, soapy water, or any other beverage or chemical solution can leave residue and cause damage that is not covered.
- Extreme Temperatures: While not directly part of the IP rating, extreme heat or cold can affect the integrity of the seals and the device's internal components, potentially compromising water resistance.
Apple's warranty does not cover liquid damage. Therefore, regardless of the IP68 rating, it is prudent to avoid situations that put your iPhone at risk of liquid exposure.
Maintaining Your iPhone 14 Pro's Water Resistance
To ensure your iPhone 14 Pro maintains its advertised water resistance over time, a proactive approach to care and maintenance is essential. The seals that protect your device are not invincible and can degrade or be compromised through various means. By following specific guidelines, you can help preserve this crucial protective feature for as long as possible, safeguarding your investment against accidental liquid encounters.
The most significant factor in maintaining water resistance is avoiding situations that stress or damage the device's seals. This includes preventing physical damage, being mindful of the types of liquids it encounters, and avoiding unauthorized repairs. Understanding that water resistance is not a permanent state is the first step towards effective long-term care.
Protecting Against Physical Damage
Physical damage is one of the most common ways water resistance is compromised. A cracked screen, a dented frame, or any other visible damage can create entry points for liquids. Even a minor drop can stress the seals, making them less effective. Therefore, protecting your iPhone from physical impacts is paramount.
- Use a Protective Case: A good quality case can absorb shock from drops, preventing direct impact on the phone's body and screen. Look for cases that offer raised edges around the screen and camera for added protection.
- Handle with Care: Avoid dropping your phone or subjecting it to rough handling. Be particularly cautious when using it near edges, water bodies, or in crowded places where it might be knocked out of your hand.
- Inspect Regularly: Periodically check your iPhone for any signs of damage, such as cracks, dents, or loose components. If you notice any damage, consider getting it professionally repaired promptly to restore its structural integrity.
A well-maintained device is inherently more resilient, and this applies directly to its water resistance capabilities.
Avoiding Compromising Liquids and Environments
The IP68 rating is based on performance in fresh water. Exposure to other liquids can be significantly more damaging and should be avoided. Being aware of these risks is key to preserving the phone's integrity.
- Steer Clear of Salt Water and Pool Water: Do not intentionally submerge your iPhone in the ocean, sea, or swimming pools. These liquids contain corrosive substances that can degrade seals and damage internal components over time.
- Be Cautious with Soapy Water and Chemicals: Avoid exposing your phone to soap, detergents, perfumes, cosmetics, or any other chemical solutions. These can also affect the seals and potentially damage the finish.
- Minimize Exposure to Steam and High Humidity: While light splashes are okay, prolonged exposure to steam (e.g., in a sauna or very steamy bathroom) or extremely high humidity can stress the seals and lead to condensation.
Treating your iPhone with care regarding the types of liquids it encounters will significantly extend its water-resistant capabilities.
The Impact of Repairs on Water Resistance
If your iPhone 14 Pro requires service or repair, especially for issues involving the screen, battery, or other internal components, it's crucial to ensure that the water resistance is properly restored. Apple and authorized service providers are equipped to reapply seals and gaskets to maintain the device's integrity. However, non-authorized repairs might not adhere to the same standards.
- Use Authorized Service Providers: For any repairs, always opt for Apple or an Apple Authorized Service Provider. They use genuine parts and follow Apple's procedures for maintaining water resistance.
- Inquire About Water Resistance: If you have your iPhone serviced, ask the provider about their process for restoring water resistance. A reputable service will confirm that seals are replaced.
- Post-Repair Caution: Even after a repair by an authorized provider, it's wise to be slightly more cautious with your device around liquids for a short period, allowing the new seals to settle.
A compromised repair process is a direct pathway to losing your device's water resistance, so choosing the right service is critical.
What to Do If Your iPhone 14 Pro Gets Wet
Discovering that your iPhone 14 Pro has been exposed to liquid can be a moment of panic, but knowing the correct steps to take immediately can significantly impact the outcome. While the IP68 rating offers considerable protection, swift and appropriate action is still crucial if an incident occurs. The goal is to minimize potential damage and dry the device thoroughly without causing further harm.
The key is to act quickly and avoid common mistakes that can exacerbate liquid damage. Modern iPhones have internal indicators that can detect liquid presence, and immediate, correct handling can prevent minor incidents from becoming major problems. Remember that Apple's warranty typically does not cover liquid damage, so these steps are vital for your own mitigation efforts.
Immediate Actions: The First Few Minutes
When your iPhone 14 Pro encounters liquid, immediate action is your best defense. The sooner you can address the situation, the better the chances of preventing internal damage.
- Remove from Liquid: As soon as possible, take the iPhone out of the liquid.
- Power Off: If the phone is still on, power it down immediately. Do NOT attempt to turn it on or use it. This prevents short circuits that can occur when electricity flows through wet components.
- Dry the Exterior: Gently wipe down the entire exterior of the iPhone with a soft, lint-free cloth, such as a microfiber cloth. Pay attention to ports, speaker grilles, and buttons.
- Remove Accessories: Take off any case, screen protector, or other accessories that might trap moisture.
These initial steps are critical for limiting the spread of liquid within the device.
Drying Techniques: What to Do and What NOT to Do
Proper drying is essential after an incident. However, incorrect methods can introduce new risks or push moisture deeper into the device. Adhering to recommended practices is key.
- Gentle Shaking: Hold the iPhone with the charging port facing downwards and gently tap it against your hand to encourage liquid to drain from the port.
- Air Dry: Place the iPhone in a dry, well-ventilated area. You can stand it upright or lay it flat. Allowing it to air dry for at least 5-6 hours, or even up to 24 hours, is recommended.
- Use a Fan (Optional): If you wish to speed up the process, you can place the iPhone in front of a cool fan. The airflow can help evaporate moisture.
Crucially, avoid the following:
- Do NOT use heat sources: Never use a hairdryer, oven, microwave, or place the iPhone near radiators or in direct sunlight to dry it. Excessive heat can damage internal components and seals.
- Do NOT insert foreign objects: Do not insert cotton swabs, paper towels, or any other objects into the charging port or other openings. This can push moisture further in or damage delicate connections.
- Do NOT use compressed air: While it might seem like a good idea, compressed air can force liquid deeper into the device or damage components.
- Do NOT put it in rice: The common 'rice trick' is largely ineffective and can introduce dust and debris into the phone's ports and openings, potentially causing more harm than good.
Patience is a virtue when drying your iPhone. Allow ample time for the device to dry completely before attempting to power it back on.
When to Seek Professional Help
If, after following the drying procedures, your iPhone 14 Pro still exhibits issues, or if you exposed it to something other than fresh water, it is time to consult a professional. Even if the device seems to work initially, residual moisture can cause corrosion over time.
- Persistent Issues: If the screen flickers, audio is distorted, buttons are unresponsive, or charging is problematic after drying, it indicates internal damage.
- Non-Fresh Water Exposure: If your iPhone was submerged in salt water, pool water, or came into contact with other corrosive liquids, seek professional inspection immediately.
- Liquid Damage Indicator: If you suspect liquid has entered and caused damage, and you are unsure about the extent, a professional can diagnose the problem.
Contact Apple Support or visit an Apple Store or Apple Authorized Service Provider. They can assess the damage and recommend repair or replacement options. Remember that liquid damage is typically not covered by the standard warranty, so be prepared for potential out-of-warranty service costs.
Understanding IP Ratings for Older iPhone Models
While the iPhone 14 Pro boasts a specific IP68 rating, it's beneficial to understand how water resistance has evolved across previous iPhone generations. This context helps appreciate the advancements in device protection and clarifies expectations if you are comparing models or considering older devices. The journey from basic splash resistance to robust submersion protection has been a gradual but significant one in iPhone history.
Earlier iPhones had very little to no official water resistance. The introduction of formal IP ratings marked a significant shift, offering users greater confidence in their devices' durability against everyday mishaps. Each subsequent generation has seen refinements, sometimes increasing the depth or duration capabilities, or standardizing the rating across the entire lineup.
iPhone 13 Series Water Resistance
The iPhone 13 series, including the iPhone 13 mini, iPhone 13, iPhone 13 Pro, and iPhone 13 Pro Max, also features an IP68 rating under IEC standard 60529. However, Apple specifies a slightly different maximum depth for these models compared to the iPhone 14 Pro. For the iPhone 13 lineup, the rating allows for submersion in fresh water up to a maximum depth of 6 meters for up to 30 minutes. This means the protection level is effectively the same in terms of duration but with a slightly more conservative depth specification in lab testing.
This continuity in rating from the iPhone 12 series (which also had IP68, albeit with a different depth/duration specification) to the iPhone 13 and then to the iPhone 14 Pro demonstrates Apple's commitment to maintaining a high standard of water resistance in its flagship devices. It offers users a consistent experience in terms of protection against common liquid accidents.
iPhone 12 Series Water Resistance
The iPhone 12 lineup, comprising the iPhone 12 mini, iPhone 12, iPhone 12 Pro, and iPhone 12 Pro Max, was the first to introduce the IP68 rating. Apple defined this rating for the iPhone 12 series as submersion in fresh water up to a maximum depth of 6 meters for up to 30 minutes. This was a significant upgrade from previous generations and set a new standard for Apple's premium smartphones. Before the iPhone 12, models like the iPhone 11 series and earlier had no official IP rating for water resistance, meaning they offered only limited splash resistance at best.
The iPhone 12 water resistant rating was a major selling point, providing users with enhanced durability. It paved the way for the continued inclusion and refinement of this feature in subsequent models like the iPhone 13 and 14 series.
Pre-iPhone 12 Models and Splash Resistance
Before the iPhone 12 series, Apple did not provide an official IP rating for water resistance on its iPhones. Models such as the iPhone 11, iPhone XR, iPhone X, iPhone 8, and earlier had no formal certification for submersion. However, they did possess a degree of inherent splash resistance due to design improvements in sealing ports and internal components.
For example, the iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max were generally understood to be resistant to splashes, rain, and brief accidental dunks in shallow water. Apple stated these devices could withstand submersion for up to 30 minutes at a maximum depth of 1 meter. This was later clarified as an informal 'splash resistant' capability rather than a certified IP rating. Any intentional submersion or exposure beyond these informal guidelines was not recommended and could lead to damage not covered by warranty. The iPhone 10 (iPhone X) and earlier models had even less protection, with only basic resistance to minor splashes.
Comparing Water Resistance Across Generations
When comparing water resistance across different iPhone generations, the transition from informal splash resistance to certified IP68 is the most significant leap. For models released after the iPhone 12, the IP68 rating has become standard for Pro and standard models, with minor variations in specified depth or duration. It is crucial to check the specific rating for the model in question, as even within the IP68 classification, there can be differences in tested limits.
For instance, while the iPhone 14 Pro is rated for up to 6 meters for 30 minutes, some other IP68-rated devices might have different specifications. Always refer to Apple's official specifications for the exact model you own or are interested in. This ensures you have accurate expectations regarding its capabilities and limitations.
Is the iPhone 14 Pro Waterproof or Water Resistant?
A common point of confusion is the difference between 'waterproof' and 'water resistant'. For the iPhone 14 Pro, the accurate term is 'water resistant'. This distinction is critical because it defines the device's capabilities and limitations when exposed to liquids. Understanding this difference helps manage expectations and prevent potential damage by avoiding misuse.
Waterproof implies a complete and permanent imperviousness to water under any condition, which is extremely difficult and often impractical to achieve for complex electronic devices like smartphones. Water resistance, on the other hand, means the device can withstand exposure to water up to certain limits, under specific conditions, without damage. The iPhone 14 Pro's IP68 rating falls firmly into this category.
Defining 'Water Resistant' vs. 'Waterproof'
Water Resistant: A water-resistant device can repel water to a certain degree. It is designed to protect against accidental splashes, rain, and brief submersion. However, this resistance is not absolute and can degrade over time. The iPhone 14 Pro is certified as water resistant, meaning it can handle specific scenarios like being dropped in a sink or caught in a shower, up to defined limits.
Waterproof: A waterproof device is designed to be completely impervious to water, regardless of depth or duration. True waterproofing is rare in consumer electronics, especially for devices with ports, buttons, and screens that require interaction. If a device were truly waterproof, it would theoretically withstand any level of water exposure without damage. No smartphone, including the iPhone 14 Pro, achieves this level of absolute protection.
The distinction is vital because treating a water-resistant device as if it were waterproof can lead to costly damage. For example, taking your iPhone 14 Pro for a swim in the ocean, despite its IP68 rating, would be considered misuse and likely result in liquid damage not covered by warranty.
The Significance of the IP68 Rating
The IP68 rating on the iPhone 14 Pro is a testament to its design and engineering, providing a high level of protection. As discussed, this means dust-tight ingress protection and the ability to withstand submersion in fresh water up to 6 meters for up to 30 minutes. This is a substantial capability that covers most common accidental exposures.
However, the rating is specific. It applies to fresh water, not salt water, chlorinated water, or other liquids. It also has defined limits on depth and duration. Exceeding these limits, or exposing the device to conditions outside of the tested parameters, means the 'resistance' may fail. The internal liquid contact indicators can detect moisture, and if triggered, can affect warranty service, even if no visible damage occurred.
When Water Resistance Might Fail
Several factors can lead to the failure of your iPhone 14 Pro's water resistance, even if you are careful. Understanding these potential failure points helps in taking preventative measures:
- Physical Damage: As previously mentioned, cracks in the screen or body, or damage to the SIM tray, can compromise the seals.
- Aging Seals: The seals and adhesive used to make the iPhone water-resistant can degrade over time due to normal wear and tear, exposure to heat, or chemical reactions.
- Improper Repairs: If your iPhone has been repaired by an unauthorized service provider, the seals may not have been replaced correctly, or at all.
- Exposure to Non-Fresh Water: Salt water, pool chemicals, soapy water, and other liquids can be more corrosive and can damage the seals and internal components more rapidly than fresh water.
- Extreme Temperatures: Exposure to very high or very low temperatures can affect the integrity of the seals.
Therefore, while the iPhone 14 Pro is significantly protected, it is not invincible. It is designed to offer resilience against everyday accidents, not to be used in aquatic environments.
Protecting Your Investment: Beyond Water Resistance
While the iPhone 14 Pro's IP68 water resistance rating is a significant feature providing peace of mind against common liquid mishaps, it is just one aspect of protecting your valuable device. True investment protection involves a multi-faceted approach that considers its overall durability, security, and longevity. By implementing a few key strategies, you can ensure your iPhone remains in top condition for years to come.
The allure of advanced technology comes with the responsibility of safeguarding it. Beyond water resistance, focusing on physical protection, data security, and mindful usage habits will contribute to a more robust and enduring ownership experience. Think of these measures as complementing the built-in resilience of your iPhone.
Physical Protection Strategies
The IP68 rating protects against liquid ingress, but it offers no defense against drops, scratches, or impacts. Therefore, robust physical protection is paramount:
- High-Quality Cases: Invest in a durable case that offers good shock absorption and raised edges to protect the screen and camera lenses. Consider cases specifically designed for drop protection.
- Screen Protectors: A tempered glass screen protector can prevent scratches and absorb impact from drops, potentially saving your display from cracks.
- Careful Handling: Be mindful of where you place your iPhone. Avoid leaving it on unstable surfaces or in pockets where it might be crushed.
These measures work in conjunction with the device's inherent durability to prevent common forms of damage.
Data Security and Privacy Measures
Protecting your iPhone also means safeguarding the sensitive data it holds. Water resistance won't prevent unauthorized access if your device is lost or stolen:
- Strong Passcode: Always use a strong, unique passcode.
- Biometric Authentication: Enable Face ID for secure and convenient unlocking.
- Two-Factor Authentication: Ensure two-factor authentication is enabled for your Apple ID to protect your account.
- Find My iPhone: Keep 'Find My iPhone' enabled. This feature allows you to locate, lock, or erase your device remotely if it's lost or stolen.
- App Permissions: Regularly review app permissions to ensure they only access data they absolutely need.
Securing your device is as critical as protecting its physical integrity.
Battery Health and Longevity
Maintaining optimal battery health is key to your iPhone's long-term performance and usability. While not directly related to water resistance, it's a crucial part of protecting your investment:
- Avoid Extreme Temperatures: Prolonged exposure to very high or very low temperatures can degrade battery health.
- Optimize Charging: Enable 'Optimized Battery Charging' in settings to reduce battery aging.
- Use Certified Chargers: Always use Apple-certified or MFi (Made for iPhone) certified chargers and cables.
A well-maintained battery ensures your iPhone performs optimally throughout its lifespan.
Software Updates and Maintenance
Keeping your iPhone's software up-to-date is essential for security, performance, and access to new features. Beyond that, regular backups ensure you can recover your data if the worst happens:
- Install Updates Promptly: Apple frequently releases iOS updates that include security patches and performance improvements.
- Regular Backups: Set up iCloud backups or perform regular manual backups to iCloud or a computer. This ensures your photos, contacts, and other important data are safe.
By combining the iPhone 14 Pro's built-in water resistance with these comprehensive protection strategies, you can significantly enhance its durability, security, and overall lifespan, ensuring it remains a reliable tool and a valuable asset.
Frequently Asked Questions About iPhone 14 Pro Water Resistance
Users often have specific questions regarding the water resistance of their iPhone 14 Pro. Addressing these common queries provides clarity and helps users better understand the capabilities and limitations of their device, ensuring responsible usage and proper care.
Understanding the nuances of water resistance is key to maintaining your device and avoiding costly damage. Here are some of the most frequently asked questions:
Is the iPhone 14 Pro waterproof?
No, the iPhone 14 Pro is not waterproof; it is water-resistant. It has an IP68 rating, meaning it can withstand submersion in fresh water up to 6 meters for up to 30 minutes under controlled conditions. This is a high level of resistance, but not absolute waterproofing.
What does the IP68 rating mean for my iPhone 14 Pro?
An IP68 rating signifies that your iPhone 14 Pro is dust-tight and can be submerged in fresh water up to 6 meters for up to 30 minutes without sustaining damage. This rating is tested under specific laboratory conditions and is not a permanent guarantee.
Can I swim with my iPhone 14 Pro?
Apple does not recommend swimming with your iPhone 14 Pro. While it has an IP68 rating for fresh water submersion up to 6 meters for 30 minutes, this is tested under laboratory conditions. Salt water, pool chemicals, and the motion of swimming can all compromise its resistance and potentially cause damage.
What should I do if my iPhone 14 Pro gets wet?
If your iPhone 14 Pro gets wet, power it off immediately, gently wipe the exterior with a soft cloth, and let it air dry in a well-ventilated area for at least 5-6 hours, ideally up to 24 hours. Do not use heat sources or insert objects into ports.
Does water damage void the iPhone warranty?
Yes, liquid damage typically voids Apple's standard warranty. While the IP68 rating offers protection against accidental splashes and brief submersion, intentional or excessive exposure that leads to damage is usually not covered. It's crucial to avoid situations that risk liquid exposure.
Can I use my iPhone 14 Pro in the shower?
It is not recommended to use your iPhone 14 Pro in the shower. While it may withstand incidental splashes, the steam, condensation, and potential for direct water contact can stress the seals over time and lead to moisture ingress, which is not covered by warranty.
How long does the water resistance last on an iPhone 14 Pro?
Water resistance is not a permanent feature. The seals and adhesives that provide protection can degrade over time due to normal wear and tear, exposure to elements, or after repairs. It is advisable to be cautious with liquid exposure throughout the device's lifespan.